Primed and Ready

I got all the parts for the horizontal stabilizer primed tonight. I had all the parts labeled during building. Just marked which side and what number rib it was with a sharpie. But when you prep the parts with MEK that gets removed along with any dirts and oils. So, I laid out all the parts on the table and then wrote on the table which part it was, then once the primer dries, relabel the parts before removing them from the table. Simple and it works. Many ribs are identical, but have been final drilled in a certain spot. So to be sure it goes back in that exact spot, you have to label. (4.5)